EVENT > Monster Energy King Of Europe Round 3 @ Parcmotor Castelloli, Spain
It's that time again, so please get comfy people, as I'd like to take you on a tour of Round 3 of KOE! The next stop on the Monster Energy King Of Europe…See More
Real Cars. Real Drivers, Real Performance
any ideas for some upgrades please and contacts
Hi everybody im new to this club ive got a evo 8 fq400 mr i wana build
it from 400bhp to 700bhp by summer for santa pod drag racing can any
give me some sensible ideas about some of the uprgades i should be
carefull about or what i must do for the 700bhp engine re-build any
advices and any contacts that you could recommend please rite to me thanks.
it from 400bhp to 700bhp by summer for santa pod drag racing can any
give me some sensible ideas about some of the uprgades i should be
carefull about or what i must do for the 700bhp engine re-build any
advices and any contacts that you could recommend please rite to me thanks.
Replies to This Discussion
-
Permalink Reply by JimmyDrama on -
welcome to the site mate. The best person to talk to is project and adi. Project has several evo builds going on now and adi has a secret build on the go too.
-
Permalink Reply by R35Andy on -
Depends on your budget and spec, there are a few tuners who can help you out but 700bhp isn't off the shelf!
-
Permalink Reply by huseyin kesen on -
hi mate well budget hmm looking around 10 or 15 thousand i know its not off the shelf ofcourse theres gone be qiute abit special parts.
R35Andy said:Depends on your budget and spec, there are a few tuners who can help you out but 700bhp isn't off the shelf!
-
Permalink Reply by Chris Garner on -
Welcome to the site mate,
I will have a word with my aunts brother, Patrick, as he has a evo VII with 650whp still with a 2.0l capacity. i will get his spec list for you.
He has spent a serious amount of money on it though, the engine is built to take 1000hp.
Is your budget just for the engine or have you thought about suspension and brakes etc?
-
Permalink Reply by JimmyDrama on
-
So you mean your uncle?
Chris Garner said:Welcome to the site mate,
I will have a word with my aunts brother, Patrick, blockquote>
-
Permalink Reply by huseyin kesen on
-
hi mate thanks i would be gratefull if you could get his list. i havent realy thought of the breaks and suspension i thought just engine parts would be enought and the rest of the parts would be able to handle 650bhp atleast, dont forget the evo vii was not manufactured 400bhp it was probly just over 250bhp so therefore i dont think i would need changing other parts probly start of with turbo ,manifold,clutch thats for sure , cam pulleys, timming belt tensioners, maybe the gear box, fuel injectors, roll cage and probly some other pieces that i cant think for now.
Chris Garner said:Welcome to the site mate,
I will have a word with my aunts brother, Patrick, as he has a evo VII with 650whp still with a 2.0l capacity. i will get his spec list for you.
He has spent a serious amount of money on it though, the engine is built to take 1000hp.
Is your budget just for the engine or have you thought about suspension and brakes etc?
-
Permalink Reply by Chris Garner on
-
well no i mean my aunts brother, if he was my uncle he would be married to his sister! lol
i am waiting on him to send it over dude.
personally id want to change it all to be safe. the brembos that were on my GTR are the same as the evo if i remember correctly and no way could that haul my car up from speed quick enough. I know the evo is lighter but would probably look in to it.
short list:
block bore and hone
pistons
rods
bearings
head bolts
rod bolts
bottom end balance
cams
cam gears
valves
turbo
manifold
intake
intercooler + piping
radiator?
fuel pump
injectors
clutch
flywheel
ecu + mapping
general gist, am not an evo person but those are just universal parts for a build of that level, valves etc may not be necessary but if youre going to do it do it properly :)
JimmyDrama said:So you mean your uncle?
Chris Garner said:Welcome to the site mate,
I will have a word with my aunts brother, Patrick, blockquote>
-
Permalink Reply by huseyin kesen on
-
well ofcoure it has to be done proply because i love my car i am planing a budget of £10 to £15 thousand hope thats enough.
-
Permalink Reply by Chris Garner on
-
his username on mlr is turbo330, have a look on there for posts of his.
if i find it before you will post the spec on here
-
Permalink Reply by Chris Garner on
-
there you go :)
http://www.lancerregister.com/reg_cardetails.php?carid=1035
im buying his old GT30 for my civic woooo
-
Permalink Reply by Christopher Welshy Hamer on -
10-15 Thou is possible althou not a great budget as you can pay that for an Engine with no Turbo or ECU. i think you should Aim for 500-550 shake out all the niggles then push it further. For a Pump fuel build over 650 you will need something like a GTX42 a FP3586 HTA will cost you 5000 for the Kit and will see 650 on Pump at around 2- 2.2 bar .. Vipec ECU is around 1100 fitted so as you can see thats a huge part of a budget gone and you will need brakes and Sus to take on that power. Depending on what on what you will use it for you will need a Nice fuel system in place. maybe a twin bosh 44 and swirl pot or a Aeromotive . If you need any info then drop me a message
Most Popular
The word according to
Latest Activity
- Top News
- Everything
Becci liked Daniel Fegent's blog post EVENT > Monster Energy King Of Europe Round 3 @ Parcmotor Castelloli, Spain
Daniel Fegent liked Daniel Fegent's blog post EVENT > Monster Energy King Of Europe Round 3 @ Parcmotor Castelloli, Spain
Andi Gordon commented on Andi Gordon's blog post A trip to Englandshire."Cheers guys! Teesside is definitely worth a trip. Would love to see other tracks adopt this sort of drift day, the seat time for the drivers was unbelievable, and the opportunity for these guys to practice on the same track that they will be…"
James Tremain commented on Andi Gordon's blog post A trip to Englandshire."Andi what a excellent write up, i need to get myself to teeside.."
Becci liked James Tremain's blog post British Drift Championship hits up Pembrey circuit Wales......HARD!!!!
Craig Harper commented on Andi Gordon's blog post A trip to Englandshire."Love it, looks like a great level of drifting, possibly more days follow the format maybe? Cages, lower numbers, higher standard of drift?
The pics defo cover the event...didn't even miss the pit shots tbh! All action!
Was gutted not to make…"
Andi Gordon commented on Andi Gordon's blog post A trip to Englandshire."Cheers Dan. Gaynor was definitely on it! You need to get that Vector mount on top of his car for some of them entries. Will be mega footage."
Daniel Fegent commented on Andi Gordon's blog post A trip to Englandshire."Fantastic write up & pics Andi! Love your reports dude, always a good read :D Excellent shots, those backward entries... WOW!!! Psyched for BDC Round 3! "
© 2013 Created by JimmyDrama.
